Laser Level Reviews
By: Date: December 27, 2020 Categories: Laser,Level,Uncategorized

These battery-powered devices shoot precise beams of light that stay level and plumb over long distances—perfect for installing cabinets, doors, tile, trim, and more. Here are our picks for the four basic types of self-leveling lasers, with pointers on how to use each one.

Laser Level Reviews

1. 3-Plane Laser Level: Bosch GLL3-80

A laser level is projecting two laser lines perpendicular to each other on the floor.

Photo by James Worrell

Meet the only laser level that simultaneously projects three 360-degree perpendicular beams on the walls, ceiling, and floor. It also shoots single horizontal or vertical lines. It has no moving parts, so batteries and parts last longer.

Specs: 1.7 pounds, 65-foot visibility, ¼-inch accuracy at 100 feet. Includes mount with rack-and-pinion height adjustment.

About $600;

2. Dot Laser Level: Johnson 40-6670

A plumb laser level with the beam pointing downwards and another pointing upwards on the front of the device.

Photo by James Worrell

This device shoots two plumb beams—one up, one down—which is all you need to install doors or mark ceiling-fixture locations. We liked its bright dots and the housing’s easy-to-grip, protective rubber-like covering.

Specs: 1.27 pounds, 100-foot visibility, accurate to ¼ inch at 100 feet. Includes target plate to enhance beam visibility.

About $90;

3. Cross Laser Level: Craftsman 48250

A laser level that works well for tile and floor because the light comes from the side of the device at a 120 degree angle.

Photo by James Worrell

It projects 120-degree level and plumb beams separately or together. Handy for tiling walls or floors. Like these other lasers, it beeps when out of level, but this one’s beam can be locked, for example, to help you lay out staircase wainscoting.

Specs: 1.5 pounds, 100-foot visibility, accurate to ¾ inch at 100 feet. Includes adjustable base.

About $90;

4. Rotary Laser Level: DeWalt DW074KD

Photo by James Worrell

The spinning beam creates a 360-degree level line. Use it for projects on multiple walls, such as kitchen cabinets and chair rails. Outdoors, a receiver detects the invisible beam up to 600 feet away.

Specs: 4.5 pounds, 100-foot visibility, accurate to ¼ inch at 100 feet. Includes receiver, wall mount, and target plate.

About $465;

5. Modern Spirit Levels

Savage Lighted Torpedo Level TLL049M

A modern spirit laser lever from home depot.

Photo by James Worrell

Milled from a hunk of aircraft-grade aluminum, this 9-inch-long level is tough and handy. Strong rare-earth magnets let it cling to iron drain pipes and steel studs, and illuminated vials prove helpful in dark spaces.

About $30; for plumbing, steel framing, and tight spots. Home depot.

Empire True Blue E80.24 I-beam

A modern spirit laser level from Empire Level.

Photo by James Worrell

This rugged 24-inch level is a versatile, lightweight workhorse for plumbing and leveling everything from cabinets to fence posts. It features a graduated vial that reads pitch in ⅛-inch increments, useful for checking the slope of a gutter or a walkway.

About $25; for carpentry, plumbing, and landscaping.

Stabila 41048 R-Beam

A yellow modern spirit laser level from Stabila.

Photo by James Worrell

The R-shaped cross section is easy to grab and, according to the manufacturer, 120 percent stronger than its top-of-the-line box-beam levels. Use this 48-inch model to hang doors, as a straightedge—it has three uninterrupted edges for striking lines—or even as a screed. It’s a snap to clean.

About $180; for carpentry, landscaping.

Level Techniques

1. Tile a ceiling (with Tin)

Person projecting a laser level onto the ceiling to help align a section of ceiling tile.

Illustration by Gregory Nemec

Ceiling panels look best with one row centered above a main doorway. Mark the ceiling 12 inches to one side of the doorway’s center, where the panel edges will land. Transfer the mark to the opposite side of the room. Using a three-plane laser, align one beam with both marks and the crossbeam where you want the central panel’s perpendicular edge to land. Nail the first rows of panels along the laser lines.

2. Plumb a Jamb

Person using a laser level to measure where the hinge of a door should go by seeing where the laser lands on the measuring tape.

Illustration by Gregory Nemec

Set the dot laser several inches from the jamb, with the dot centered between the edges of the head jamb. Hold a measuring tape horizontally against the centerline of the side jamb at each hinge location, and check where the beam lands on the tape. Shim between the jamb and stud at those locations until all the jamb-to-beam measurements match.

3. Tile a Wall

Person using a laser level to mark off where a section of tile will be installed on the wall.

Illustration by Gregory Nemec

Measure and mark the center point of the area to be tiled. Set the cross laser far enough from the wall so that the beams span the area and cross at the marked center point. Working in one quadrant at a time, spread the adhesive, then start setting tiles alongside the vertical beam. Tile up to the horizontal beam. Finish one quadrant before starting the next.

4. Install Wainscot

Person installing wainscot on a wall and using a laser level to help mark the height.

Illustration by Gregory Nemec

Mark a wall where you want the top edge of the bead board to land. Set the rotary laser in the middle of the room on a tripod, turn on the laser, and adjust the speed of the beam’s rotation until a solid line appears around the room. Adjust the tripod height until the laser line meets the mark on the wall.

Wondering what your home is worth in today’s market?

Find out in seconds, ONLINE at:

Get New HOT listings to your inbox daily, before any other buyers at:



Leave a Reply

Your email address will not be published. Required fields are marked *